How to reset a Huawei P Smart? format and HARD RESET

reset a Huawei P Smart

Are you looking for how to reset a Huawei P Smart? The Huawei P Smart It is a mobile with which users in general are very satisfied. But, as with all smartphones, some performance problems may appear over time.

If it no longer works as it did at first, you can try formatting as factory. In this post we show you the different options you have to reset and Hard Reset.

How to format a Huawei P Smart, reset to factory mode and restart – Hard Reset

Soft Reset – Normal or forced restart

When we return our mobile phonemobile phone to factory settings, we lose all the information we have inside. And this today can be a real catastrophe. For this reason, it is highly recommended to make a Backup.

format a Huawei P Smart

But if our Huawei P Smart has just hung up, maybe you don't have to be so drastic. We can try to do a soft reset or forced restart, through the following steps:

  1. Press the power button for a few seconds (between 5 and 10).
  2. The phone will turn off.
  3. Wait for a few seconds.
  4. The Huawei P smart will have restarted and should work normally.

All the data and information that we had inside will not have been lost. At first it seems a better option than the HHard Reset, but the reality is that if the problems are due to some file that we have on the phone, the problem will still be there.

restart a Huawei P Smart

Reset a Huawei P Smart through the Settings menu

In the event that you have decided to reset the Huawei P Smart, if your mobile can be turned on and used relatively normally, the easiest thing to do is to do it through the menus. It is a method as effective as others and a little more intuitive to perform.

The steps you will have to follow for this are the following:

  1. Make sure the phone is on.
  2. Go to Settings>Advanced settings
  3. Go to Backup/Reset.
  4. Choose Factory Reset.
  5. Tap Reset and tap again to confirm.

hard reset Huawei P Smart

Format Huawei P Smart – Hard reset using buttons, Recovery menu

In the event that you cannot even access the menus, you can also format a Huawei P Smart and do a hard reset using the Recovery menu.

The process for this is as follows:

  1. Turn off the phone.
  2. Hold down the power and volume up buttons for a few seconds at the same time.
  3. Release all keys when the Huawei logo appears on the screen.
  4. In this menu, go to wipe data/factory reset. Use the volume buttons to move and the power button to confirm.
  5. Choose wipe data/factory reset again.
  6. Finally, select the Reboot system now option by using the power button.

Have you had to reset a Huawei P Smart to factory mode? What method have you used? You can share your experience in the comments section.


Be the first to comment

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*