Do you need to reset the Google Pixel 3 and format it to factory mode? Although the Google Pixel 3 In general, it is a fairly reliable Android mobile, it is normal that over time it begins to give small malfunctions.
With use, most of us end up installing junk files that reduce the performance of our devices. Therefore, resetting to factory settings can be an interesting solution.
Below we show you all the methods you can carry out for this.
? How to reset a Google Pixel 3, format and HARD RESET factory mode
? Soft reset, normal reset
When you reset to factory mode, you will lose all the information you have stored on the Google Pixel 3. Therefore, you can first try a less drastic solution.
El soft reset or normal reset, It is nothing more than a forced restart, which can save you if your mobile has simply hung up. To do this, you simply have to follow these steps:
- Hold down the power button until the screen turns off. Usually between 5 and 10 seconds.
- It will restart. Wait for it to finish powering up normally.
- It should work normally.
? Format the Google Pixel 3 reset through the Settings menu
If your Google Pixel 3 is still not working properly despite having done a forced restart, you will have no choice but to return it to factory mode. Of course, it is very important that you first make sure that you have done Backup of everything.
There are two methods to reset, although the easiest is to do it through the menus. Logically, this method can only be carried out in the event that your Google Pixel 3 works well enough for you to navigate the screen.
If this is your case, the steps to follow will be the following:
- Make sure the phone is on.
- Go to Settings> System.
- Sign in Reset options > Erase all data.
- Finally, choose Reset phone>Erase everything.
Once this process is complete, your Android phone will be the same as when you took it out of the box. Therefore, you will have to copy the data and install the apps again.
✅ Reset Pixel 3 Hard reset using buttons
If you can not even access the menus of your mobile, you can reset the phone to factory mode with the following steps:
- Turn off the phone.
- Press and hold the power and volume down buttons at the same time.
- Release the buttons when a menu appears on the screen.
- Move with the volume keys until Recovery Mode and confirm with the power button.
- When an image of the Android robot appears, press the power button and after two seconds the volume up button.
- In the menu that appears, choose wipe data/factory reset.
- Choose Yes on the next screen.
- Finally choose Reboot system now.
- After this, it will take a few minutes to start with the first configuration. Choose language, configure Gmail account, etc.
If you want to share with us your experience formatting the Google Pixel 3, we invite you to do so in our comments section.